|
|
| Taili Plastic Machinery: On The Road Of Environmental Protection, We Also Contribute As Much As We Can! |
|
|
| |
Key Word: Taili Plastic Machinery, Injection Molding Machine, Interests, Biodegradable, PLA
Environmental protection is the eternal topic of human environmental development, which is also the eternal law for human beings to reproduce and survive on the green planet. With the passage of time and the development of civilization, the theme of environmental protection is particularly important.
In our life, with the development of technology and the passage of time, plastic products turn to be our most daily necessities with huge annual output, and its recycling and treatment has become a big problem. At present, most of the plastic raw materials used are non degradable materials, which are difficult to decompose after being buried in the soil for decades, which is undoubtedly a big stumbling block on the road of environmental protection.
Therefore, the use of degradable materials has become a new trend, and degradable materials products will become a mainstream in the future market. In order to actively respond to the trend of the times, Taili Plastic Machinery has also developed a new generation of special injection molding machine for degradable injection products, contributing to the great cause of environmental protection!
1. Green Regulations
In the face of increasingly serious white pollution, countries around the world have issued policies to increase taxes and other related policies, advocating less use and prohibition of non degradable plastic products. With the promotion of these laws, degradable materials, with the advantage of less harm to the environment, are likely to replace traditional plastic products in the near future.
On August 28, 2020, the Ministry of Commerce issued the notice on Further Strengthening the Control Of Plastic Pollution In The Field Of Commerce, requiring the implementation of the regulations on the prohibition and restriction of plastic. Since the first half of 2020, the National Development and Reform Commission, the Ministry of ecological environment and other departments have successively issued policy documents such as "Opinions On Further Strengthening The Control Of Plastic Pollution", "Notice On Solidly Promoting The Control Of Plastic Pollution" and so on, which put forward clear requirements for the phased task of banning and limiting plastic in the business field. Therefore, degradable materials will become the mainstream in the near future.
More and more people begin to pay attention to the recycling and reuse of traditional plastic products, including the reuse of plastic shopping bags and other behavior has become a major trend. The voice for degradable materials is also growing, are looking forward to the early use of degradable plastic products!
2. Green Materials
Degradable material is one of the most abundant green materials. It refers to the material that can be degraded in the sense of thermodynamics and kinetics in a period of time. According to the external factors of degradation, it can be divided into photodegradable materials, biodegradable materials and so on. At present, degradable plastics suitable for injection molding industry mainly include polylactic acid (PLA), polyadipic acid (PBAT) and polyadipic acid (PBAT).
Polylactic acid (PLA) is a new type of bio based and renewable biodegradable material, which is made of starch from renewable plant resources (such as corn, cassava, etc.). After use, it will be completely decomposed by microorganisms and eventually become carbon dioxide and water, which is very friendly to the environment.
Polyadipic acid (PBAT) is a semi crystalline polymer, a copolymer of aliphatic and aromatic groups, and a good degradable material.
Poly (butylene succinate) (PBS) has been rapidly recognized by the market since it entered the field of materials. With its low price, mechanical properties and other advantages, it has been widely recognized in the international market.
3. Breakthrough Of Difficulties
In the face of the increasingly strict plastic restriction order, people's voice for degradable products is increasing day by day. Taili Plastic Machinery has developed a new generation of special injection molding machine for degradable injection products, which has solved the problems in the production process of degradable materials layer by layer, so as to ensure the stability and high efficiency of the production of degradable products.
(1) Poor fluidity, easy to decompose at high temperature
One of the characteristics of degradable materials is poor fluidity and easy decomposition at high temperature. Therefore, in the production process, Taili Plastic Machinery in the injection temperature control, barrel heating part of the special treatment.
(2) Thin wall is easy to be injected and deformed
Compared with daily necessities, the production of degradable thin-walled products is more challenging. Once the injection is not in place, it is extremely easy to produce deformation and other phenomena, affecting the product quality and aesthetics.
(3) It is difficult to store materials evenly
Due to the particularity of degradable materials, material storage is particularly important. Therefore, in the development of a new generation of special injection molding machine for degradable injection products in Taili Plastic Machinery, we pay much attention to the uniform storage of materials, and strive to achieve stable storage of materials, so as to prepare for further injection molding.
Environmental protection has a long way to go, but with the passage of time, human beings will be able to hand in a perfect answer! On the road of environmental protection, everyone is not a bystander. Taili Plastic Machinery is also making efforts to actively respond to the call of policy and the trend of the times, contribute to environmental protection, continuously develop and improve degradable injection molding production technology, and manufacture more different types of special machines for degradable injection molding products, so as to help you stabilize production and improve production capacity!
Taili Plastic Machinery always keeps in mind that what a good injection molding machine factory should do is to help improving the capacity and boosting the profits, rather than offer the similar products the customers need. This is also what Taili Plastic Machinery keeps doing.
Follow Taili Plastic Machinery and we will share more with you.
|
|
China
