|
|
| Record 90: The Breakthrough Of Small Enterprises! With A Simple Injection Washbasin, Small Companies Can Beat Their Peers? |
|
|
| |
Key Word: Taili Plastic Machinery; Taili Plastic Machinery-Capacity Improving Expert; Efficient; Stable; Injection Molded Washbasin
In the field of injection molding manufacturing and processing, large companies have absolute advantages over small companies in capital, R & D, market and raw material cost. For the same product, it is difficult for small enterprises to have the opportunity to break through.
However, the fact is just the opposite. Starting from a simple injection washbasin, Mr. Yu of Jinhua beat his peers violently and occupied an advantage in the breakthrough battle of small enterprises. At present, in a search of Mr. Yu 's products on a certain treasure, we can still see that Mr. Yu's small shop still takes the lead with the advantage of monthly sales exceeding ten thousand.
As a matter of fact, Mr. Yu is not the pioneer of inventing this kind of technology and idea, but he does become the best in dealing with the details among the followers.
1. Treatment of material joint
This kind of silicone polypropylene foldable washbasin is very popular in recent years, but the requirements for its production process are particularly high, especially the overflow and flash will easily appear in the joint of silicone and PP (polypropylene), which will cause the product to scratch and result in further the after-sales problems.
Generally, this kind of product is usually produced by two-color injection molding machine, whose cost is very high together with the mold and the service life of mold is not long. The main reason is that the combination of silicone material and PP material is not strong. Taili Injection Molding Machine advised Mr. Yu to use new production process and method for operation, use "TLE fast machine" series servo injection molding machine and two sets of mold, while can help increase the injection speed at the same time, reduce the melting temperature of materials and prevent the generation of flash to the greatest extent.
2. Cost control
Due to the design characteristics of the two-color injection molding machine, the water pipe interface of the solution of a two-color injection molding machine plus two-color molding mold often twists. For daily-use products, there will be water leakage and other phenomena after about 100000 molds to 200000 molds. However, after the transformation of ideas, using dual-mode and dual machine for production at the same time will increase the guaranteed modulus of the finished mold to 3 million times, reducing the production and maintenance cost to the greatest extent.
3. Periodic control
Now to do injection molding products, we must have idea of flow. For the same category of products, we should use different pricing strategies. For the products with big sales volume, we should expand the market share. For the profitable products, we should expand profit space. Generally, this kind of product is produced by two-color machine, and the injection molding cycle is about 25 seconds to 30 seconds. After changing the production process, the injection molding cycle is shortened to 15 seconds, which is about 100% higher than that of peers, and the profit can be said to beat peers.
Under the current market atmosphere, it is difficult for the appearance of products to have long-term advantages, but the grasp of technology, production and details is the premise for an enterprise to truly achieve small monopoly of industry technology.
Taili Plastic Machinery always keeps in mind that what a good injection molding machine factory should do is to help improving the capacity and boosting the profits, rather than offer the similar products the customers need. This is also what Taili Plastic Machinery keeps doing.
Follow Taili Plastic Machinery and we will share more with you.
|
|
China
