|
|
 |
2021/3/5
Mr. Chen just entered the strapping industry this year, who has only three injection molding machines in his factory. Every night, he is troubled by the weird sound of injection molding machines and the low product yield. Taili Plastic Machinery helped him solve the urgent problem after a series of investigation. |
|
 |
2021/3/3
Recently, Mr. Shi of Guangdong recently received an export order. There was a problem that could not be solved even after a long period of mold test: the weld mark on the surface of the product greatly affected the hand feel. With the help of Taili Plastic Machinery, through the investigation of raising the temperature, improving the mold and checking the material, the weld mark was successfully eliminated. |
|
 |
2021/3/1
A few days ago, Taili Plastic Machinery went to Mr. Zhang's factory in Jinhua for a return visit and saw that his adjusting technician was stuck in adjusting the shrinking process of plastic parts. We had a closer look into the cold runner and discovered that there were many secrets. Today, let's talk about the ideas of adjusting the shrinkage process of PP material products. |
|
 |
2021/2/26
If you want to dominate the market, you should be the first or the only one. With the three unique advantages of no flash, no shrinkage, and the cycle shortened from 24 seconds to 15 seconds, Mr Xiang has been unique in its industry and occupies an important market! |
|
 |
2021/2/24
Glass fiber is often added to form reinforced PC to ensure the wear resistance and fatigue strength of the shell. In order to reduce appearance of the floating fiber, we can follow the three steps of "improving the solubility, increasing the feed temperature, reducing the injection pressure to increase the injection speed". |
|
|
China
