Key Word: Taili Plastic Machinery; Taili Plastic Machinery-Capacity Improving Expert; Efficient; Stable; No Flash; No Shrinkage; Cycle Time Shortened
At present, there is no doubt that the injection molding industry is an extremely fierce stock marker, and several small appliance injection molding appliance in the industry of Cixi are leading around China. Whether to be the first or the only. Cixi small home appliance injection molding shell has its own advantages, which makes it dominate around the world.
According to Mr. Xiang, there is no technical secret in the shell of injection molded small household appliances, and the materials used are common PP (polypropylene) and ABS (acrylonitrile butadiene styrene copolymer). The requirements for the surface accuracy of the products are not high. During the process of inspection, as long as the surface is smooth and no obvious shrinkage occurs, the product will pass the acceptance standard. Thus the price competition is extremely fierce.
Mr. Xiang says that the key point to increase profits of such products is very simple: either be the first one or the only one. If you can't make your own products unique, and form a clear difference with your peers, you will fall into an endless price war. There is no winner in the price war, only bad ending.
Take the atomizer handle made by Mr. Xiang as an example, the product have the following unique advantages:
1. No flash
Mr. Xiang¡¯s mold has 16 cavity and the single product weighs 3g. Due to the huge output, the production line is usually fully automatic, without manual trimming. However, the material used in the old project is ordinary secondary recycled PP material. The fluidity of the material is very poor, and the melt index is only 10. Therefore, in the production process of general manufacturers, the flash will inevitably appear, which affects the product quality greatly. But in Mr. Xiang's workshop, this problem does not exist.
2. No shrinkage
Generally, the color of this product is transparent or black. So as long as there is shrinkage, it will directly affect the appearance and feel of the product. The handle is a direct contact part of human hands, so the feel is very important for the purchaser. Mr. Xiang¡¯s product has achieved no shrinkage.
3. The period was shortened from 24 seconds to 15 seconds
The key point to achieve no flash and shrinkage in the products lies in the craftsmanship of the adjusting master, which is not that difficult to fulfill. However, on the premise of ensuring the surface accuracy, the cycle time of the control handle is shortened from 24 seconds to 15 seconds, which is increased by more than 40%. This is what¡¯s most important. This speed change makes the cost of the single handle of Mr. Xiang decrease by about 20% compared with that of the peers. This also helps Mr. Xiang occupy a bigger market while their own profit margin is ensured! With the help of Taili Plastic Machinery, Mr. Xiang successfully shortened the cycle time and doubled the production capacity!
Taili Plastic Machinery always keeps in mind that what a good injection molding machine factory should do is to help improving the capacity and boosting the profits, rather than offer the similar products the customers need. This is also what Taili Plastic Machinery keeps doing.
Follow Taili Plastic Machinery and we will share more with you.
|
