Key Word: Taili Plastic Machinery; Taili Plastic Machinery-Capacity Improving Expert; Efficient; Stable; Disposable Plastic Food Containers
can join the industry and get sufficient profits. At the same time, itĄŻs also a product thatĄŻs so complex that the capital and technical threshold will block you from making money.
Recently, a lot of customers called Taili Plastic Machinery and asked us: is there any product that can make money quickly in such bad situation of this year? My answer is: there are always products that make money. The key point is how you are going to do the business.
Under the bad condition of this year, most customers of Taili Plastic Machinery all stayed at ease. There are three reasons as follows.
1. Peers Run Badly
The disposable food containers are the same while the high-speed machine manufacturers use are different.
For some unqualified high-speed injection molding machines, the production in the first year goes smooth; in the second year, it can only make products with thicker wall thickness; in the third year, itĄŻs even worse than the ordinary injection molding machines due to serious wear and tear. The profit margin of plastic food container is not high. Generally, the standard wall thickness of lunch boxes is about 0.35mm. Due to the improper selection of injection molding machine brands, products with wall thickness of 0.35mm canĄŻ t be produced in the next year, resulting in the product weight exceeding much of the standard, and the profit dropping sharply. Generally speaking, if each lunch box weighs 0.5g more than the standard weight, the waste of materials will be as much as 360 yuan per day, and the loss will be over 10000 yuan in a month.
2. Dig Into Production Capacity And Profit
The enterprises producing plastic food container all understand that production capacity equals to profit. In order to improve the production capacity, the requirements for injection molding machines and the requirements for the service ability of manufacturers are higher. Some of the injection molding machine factory claims that their cycle time can reach about 5 seconds. But if you go to the factory for measurement, the general cycle time is about 6.5 seconds. Take 4 cavities mold as an example, customers of Taili injection molding machine generally can produce about 70000 lunch boxes per day, while other peers can only produce 50000 boxes per day. As you can see, the gap can reach 30% per day.
3. Good Service And Maintenance
The quality of injection molding machine and after-sales service is like the positive and negative sides of a coin. The two parts are interdependent. For high-speed injection molding machine, the cycle time is generally about 5-6 seconds, which is 1/3 of that of ordinary injection molding machine. In other words, the capacity of high-speed injection molding machine production for one year is equivalent to that of ordinary injection molding machine production for 3 years. As we can see, the quality of injection molding machine directly determines the capacity. Moreover, the good after-sales service can save you money.
The most important index to judge the quality of high-speed injection molding machine is to observe whether the opening and closing time is controlled within 3 seconds, and whether the jitter is small during the molding process.
Under the continuous influence of the above reasons, the daily profit of Taili injection molding machine customers in this industry is more than 20000. While many other brands of customers have come into crises like the loan default.
Taili Plastic Machinery always keeps in mind that what a good injection molding machine factory should do is to help improving the capacity and boosting the profits, rather than offer the similar products the customers need. This is also what Taili Plastic Machinery keeps doing.
Follow Taili Plastic Machinery and we will share more with you.
|
