Key Word: Taili Plastic Machinery; Taili Plastic Machinery-Capacity Improving Expert; Efficient; Stable; Select Injection Molding Machine
Disposable plastic food containers are widely-used in our daily life. The material used is food-grade PP (polypropylene) and most of them are high permeability material, the material's melt index is more than 40, the general wall thickness is greater than 0.35mm. These features make the PP food container strong and durable.
Today, Taili Plastic Machinery will talk with you about how to choose a high-speed injection molding machine to produce fast food container.
1. Test the Mold
The injection molding machines for disposable plastic food container generally are high-speed machine, which is greatly different from the general ones. Any mistake made, the service life of the machine and mold will be greatly reduced, and the use cost and training cost will be greatly improved. To solve this problem, the simplest and most practical way is to see whether the injection molding machine manufacturer has a dedicated mold testing workshop (only for fast food boxes), and ask in detail the method, standard and testing time. A good high-speed injection molding machine must go through 72 hours of continuous testing production before delivering the machine. Real machine and real mold, detailed parameter records and machine standards are required.
2. Observe the Mold Temperature
To judge the quality of high-speed injection molding machine, we must pay attention to the barrel temperature during the mold test, which is generally controlled at 315℃. If the product can run stably without problems such as edge flapping and material shortage, and the cycle time can be controlled within 4.5 seconds and the continuous mold test time is more than 72 hours, the high-speed injection molding machine can be delivered .
3. Observe the hot runner temperature
If the injection molding machine has a matching mold, the hot runner temperature must be observed during the mold test. If the hot runner temperature of each point in the process of mold test cannot reach the same, it indicates that the mold still needs to be processed. This problem should be solved before the delivering.
In the end, the purpose of buying injection molding machine is to ensure the stability of the continuous production of the product. Please don’t ignore the control and grasp of the quality of the plastic machine.
Taili Plastic Machinery always keeps in mind that what a good injection molding machine factory should do is to help improving the capacity and boosting the profits, rather than offer the similar products the customers need. This is also what Taili Plastic Machinery keeps doing.
Follow Taili Plastic Machinery and we will share more with you.
|
